---
title: How do I reset my Zebra Printer?
description: "If you are using a standard roll of labels (1.25\" by 2.25\"): 1. Turn off your printer. 2. With Printer turned off, press and hold the **FEED**button. 3. While holding the feed button, turn the printer on. 4. Continue holding…"
url: "https://winsale.net/docs/how-do-i-reset-my-zebra-printer/"
updated: "2023-08-11"
category: Printers
---

# How do I reset my Zebra Printer?

If you are using a standard roll of labels (1.25" by 2.25"): 1. Turn off your printer.

2. With Printer turned off, press and hold the **FEED**button.

3. While holding the feed button, turn the printer on.

4. Continue holding the **FEED**button until the status light starts flashing in a series of flashes.

5. Wait until the light flashes in a series of 4, then release the feed button.

6. This will reset the calibration, the printer might spit out some labels.

7. When the printer is done recalibrating, press **FEED**one more time. It should spit out just one label. If it did, congratulations, you just successfully recalibrated the device!

**If you are using any other size labels, perform the same steps as above, with only one exception: wait for the light to flash 7 times, before releasing the feed button.**

 **About this article:** This is part of WinSale's free knowledge base. WinSale is a point-of-sale system built specifically for independent shoe and safetywear retailers — 10M+ UPC database, industrial account invoicing, mobile shoe truck support, no per-transaction fees. [See if it's a fit for your store →](https://winsale.net/shoe-store-pos-system/)